Art3d Peel-and-Stick Backsplash, Marble Grey (10 sheets, 12x12) Review (2026)

What ten sheets actually cover

Each sheet measures 12 by 12 inches, roughly 300 by 300 millimeters, and the ten-sheet set covers close to 9.5 square feet once laid, which is enough for a standard stove-width backsplash run in most kitchens without needing a second box. The tiles are built from an adhesive-backed substrate topped with an epoxy resin gel layer that creates a raised, glossy marble-look surface at around 2 millimeters thick. That thin profile is part of why it is inexpensive compared with real tile or thicker composite backsplash panels, but it also means the finished surface has less depth and texture than genuine stone or ceramic.

Where and how it installs

Installation is peel-and-stick with no grout, glue, or specialty tools required, which makes it realistic as a weekend project rather than a contractor job. The manufacturer recommends applying it to a clean, smooth surface, since texture or grime underneath will show through or weaken the adhesive bond over time. The overlapping tile design is meant to conceal seams between sheets for a more continuous marble look than a plain grid of square tiles would give. It is rated resistant to stovetop heat and to bathroom humidity, with an easy-wipe surface for spills, and the manufacturer notes anti-bacterial and anti-mold properties, though it is explicitly not meant for use inside a shower.

Living with the rubbery finish

The biggest adjustment for buyers coming from real tile is texture: the surface has a slight give and a rubbery feel under a fingernail rather than the hard, cool surface of ceramic or stone. It photographs well and reads as marble from a normal viewing distance, but up close the material is clearly a composite rather than genuine tile. Wiping down grease splatters or sauce spills is quick since nothing needs to soak into grout lines, which do not exist here. Because the material is soft enough to cut with scissors or a utility knife, it is also soft enough to dent or scuff if something is dragged across it, so it suits a backsplash more than a heavily used countertop edge.

The cutting and trimming reality

Straight runs go on quickly, but cutting clean notches around outlets, switches, and corner trim takes more care than the marketing photos suggest, and a utility knife with a fresh blade and a straightedge makes a real difference in how tidy the final edges look. Buyers should expect to trim several sheets rather than assuming every piece goes on whole, especially near a stove hood or a window frame. Compared with rivals like Smart Tiles' 3D peel-and-stick line or the thicker STICKGOO tile options, this Art3d set trades a bit of surface substance for a noticeably lower price per square foot, which is the main reason it wins on value even though its build feels lighter duty.

Who this is right for

This is a strong pick for a renter who wants to cover a full backsplash cheaply and reversibly before a lease ends, or anyone testing whether a marble look suits their kitchen before committing to real tile. It is less suited to a household that wants a surface indistinguishable from stone up close, or a kitchen where the backsplash takes heavy abuse from pots and pans sliding against it. Buyers with lots of outlets, switches, or an irregular layout to cut around should budget extra time and maybe an extra sheet for mistakes, since the trimming is the part of installation most likely to slow a weekend project down.

Frequently asked questions